ARMOKRYSTAL 600 PLUS – is a 4th generation powder crystalline Integral waterproofing admixture designed to resist hydrostatic pressure and for all concrete requiring primary waterproofing. The innovative crystalline technology within ARMORKRYSTAL
600 PLUS reacts with moisture silicate and free lime, a natural by-product of the cement hydration process. This 4th generation crystalline is not only hydrophilic but has
hydrophobic properties as well. The reaction creates millions of nano-crystal which grow throughout the concrete pores and capillary tract. Thus the concrete becomes permanently sealed against the penetration of water or liquids from any direction. The concrete is protected from deterioration due to harsh environmental conditions.
ARMORKRYSTAL 600 PLUS has been specifically formulated to meet the different
temperature and climate conditions.
Advantages:
- Extremely resistant to hydrostatic pressure from both negative and positive side of the slab
- Increases freeze thaw resistance of the concrete
- Becomes an integral part of the concrete.
- Highly resistant to aggressive chemicals and protect reinforcement against corrosion.
- Non-toxic (NSF 61 certified for potable water applications)
- Negligible effect on slump, air entrainment, plasticizers and water reducers.
- Permeability tested as per ACE (Army corps of Engineers)
- Allows concrete to breathe and can seal hairline crack up to 0.4mm
Uses:
Dosage Rate: 0.8-1% by weight of cement.
Consult with ARMORSIL’s Technical Department
for assistance in verifying the appropriate
dosage rate and for further information
regarding enhanced chemical resistance and
optimum concrete performance for your project.
it should be added to the mixing water
Mixing: ARMORKRYSTAL 600 must be added to
the concrete at the time of batching.
